Цитата:
Сообщение от Andy103
Приобрел сие чудо техники.... Пытаюсь настроить Платформу, однако похвастаться ничем не могу. Все файлы скопировал, присвоил 755, mgcamd на ресивере запущен. Пока ничего не показывает. Подскажите, что не так.
Код:
newcamd.list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 91.194.76.159 4014 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
Код:
# EMM messages
# 00 don't show any EMMs
(default)
# 01 show only valid EMMs
#
02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about
ecm
# 01 normal mode, show pids processed, decoded ecm and
cw
# 02 verbose mode, show valid and bad ECMs with
data
C: { 01 }
# AU
# 00 disable, no emm pids
processed
# 01 enable, emm pids always processed for
soft-au and shared cards
# 02 auto, emm started only if
channel cant be decoded
# 03 process emm pids for network
cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new
keys, default setting
# 02 update all keys (used for valid
PMK checking)
# 04 enable TPS au
# +
tps au pid
U: { 00 } 0x1ACB
# config files folder (softcam, autoroll,
ignore/priority)
# 00 files in
/var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no
network (default)
# 01 newcamd
netclient
# 02 radegast netclient
# 04
camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00
disable
# 01 retry every new ecm
# 02
try to connect to offline shares every Q: seconds
# 04 try
to detect and fast reconnect to lost (and not used atm)
server
# + XX messages number and YY seconds to
reconnect
# mg will reconnect to server, if no answer to
last XX ecm/keepalive or
# if no answer for last ecm or
keepalive sent for YY seconds
# set to 0 to disable
N: {
01 }
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 10 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3
(default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox,
radegast
P: { 02 }
# on screen display type
# 00 No OSD
(default)
# 01 neutrino
# 02
enigma
# 03 relook
# + user password
for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
#
04 show decoding failed / fta
# 08 show emm keys
update
# + web port to use for osd
S: { 00 } 80
# Log option, summ of:
# 00 off
#
01 network udp log
# 02 log to
console
# 04 file, appended ! delete it by yourself, before
it eat all your hdd
# + IP udp-port log-file-name
L: {
04 } 192.168.1.3 514 /var/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache
will take *only* 240-400kb of memory,
# for openbox/elanvision users with
remote shares make sense to set it higher than default value,
# to not
hammer cards while timeshifting or playing crypted recordings.
E: { 3600
}
# cache option, summ of:
# 00 Off
(default)
# 01 Ecm pids cache, store pids used to decode in
/tmp/ca_cache.list at exit, load at startup, same syntax as
restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same
emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No
(default)
# 01 reread config file on channel change
(including priority and ignore, but not replace/cache)
# 02
reread SoftCam.Key on channel change
# 04 reread
SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug
emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network
login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log
messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type
detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04
relook
# 05 openbox
B: { 12 }
mgcamd.log
Код:
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45)
[mg]
Net:1:1:2:5s Show ecm:1, emm:0 Up:0 Au:0 Dir:0 Osd:no:80:0 Cache:7
Log:4:192.168.1.3:514 Reread:0
[mg] Ecm cache time: 3600
Box type:
openbox/stapi
Conax.Key error 2: No such file or directory
SoftCam.Key
error 2: No such file or directory
AutoRoll.Key error 2: No such file or
directory
Conax.Key error 2: No such file or directory
[config] newcamd
route = Andy:91.194.76.159:4014 server cardserv
newcamd keep alive: 300,
incoming port: 21000
[mgcam] emm thread started
[newcamd] Connecting to
91.194.76.159:4014...
[mg1] service 2C7 index 1 pmt pid 0 (1)
[mg1] No
supported encryption system found
[mg1] stopped
[newcamd] Connection to
91.194.76.159:4014 failed (291ms)
[mg1] stoping camd..
[mg1] service 12D
index 1 pmt pid 0 (1)
[mg1] No supported encryption system found
[mg1]
stopped
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0
(1)
[mg1] No supported encryption system found
[mg1] stopped
[mg1]
stoping camd..
[mg1] service A index 1 pmt pid 0 (1)
[mg1] ECM: CaID:
0x4AE1 -> CaPID: 0x0078 ProvID: 000000
[mg1] ECM: CaID: 0x4AE1
-> CaPID: 0x0079 ProvID: 000000
[mg1] network can't decode
[mg1] pid
0x0078 failed to decode.
[mg1] network can't decode
[mg1] pid 0x0079
failed to decode.
[mg1] stoping camd..
[mg1] service 12D index 1 pmt pid 0
(1)
[mg1] No supported encryption system found
[mg1] stopped
|
Я любитель, но нашел у Вас как минимум две ошибки. Во первых, т.к. у Вас стоит МgCamd 1,35, то обязательно в конце mg_cfg нужно дописать:
F: { 00 }. У Вас этого нет. Это одна из причин.
Второе все настройки не соответствую рекомендованным на этом сайте. Войдите в :Общие разделы: Настройка оборудования: Вариант настойки EMU Dream(D)Box с использованием mgcamd. Они отличаются от Ваших.
Важно еще проверить priority.list и ignore.list, если они у Вас конечно есть. |
