Вариант настойки EMU mgcamd на линуксовых ресиверах

[fed]

И хде ж мы плагин такой под мипс ресиверы то для sh4 взяли?Просишь 8120 Gis настроить помочь,а у самого в логе Aug 11 16:15:00 192.168.1.69 Box type: mips dreambox (dm7025, dm800)

[jhfiyu]

Сообщение от fed

И хде ж мы плагин такой под мипс ресиверы то для sh4 взяли?Просишь 8120 Gis настроить помочь,а у самого в логе Aug 11 16:15:00 192.168.1.69 Box type: mips dreambox (dm7025, dm800)

В 06 было прописано.менял на в11 всё равно не идёт.про плагин не понял?можно поподробней

[alserbel]

Эмулятор откуда брали?

[fed]

Этот дешевый рес надо суметь не настроить.Там настолько все просто с флешки ставится,стартуется с пульта и пашет,что...

[jhfiyu]

Сообщение от alserbel

Эмулятор откуда брали?

гисклуб

[alserbel]

Гисклуб большой. На спарке, на энигме рес? Conax отключен?

[jhfiyu]

Сообщение от alserbel

Гисклуб большой. На спарке, на энигме рес? Conax отключен?

рес на спарке брал на аплоде для 8120.почему не кажет сам не пойму???
ваще рес работал на спарке года три мдкамд стоял всё казало.недавно выключали свет несколько раз ресс перестал включатся на табло горела натпись null,пришлось перепрошить ремонтной прошивкой а потом последней.отсканировать заново спутники и каналы и поставить мжкамд который не могу завести досих пор поэтому прошу помощи

[alserbel]

Для спарка В 11, проверь ходит ли в инет ресивер, из другого источника эмуль возьми

[jhfiyu]

в11 пробывал.ютьб работает.откуда дайте ссылку на рабочий плагин

[alserbel]

http://www.satavto.by/ustanovka_emul... gi_s8120.html

[svisloch]

Сообщение от alserbel

Для спарка В 11, проверь ходит ли в инет ресивер, из другого источника эмуль возьми

для спарка 06

[alserbel]

Сообщение от svisloch

для спарка 06

Готов поверить свято и во веки веков, ибо у меня уже года полтора не было 8120

[aksa2030]

Здравствуйте, не работает половина виасата
вот лог

Aug 12 19:14:02 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:06 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3335ms)
Aug 12 19:14:06 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:11 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:11 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (95ms)
Aug 12 19:14:12 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:17 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:21 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (4343ms)
Aug 12 19:14:21 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:25 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:30 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:31 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (1107ms)
Aug 12 19:14:32 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:36 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3353ms)
Aug 12 19:14:37 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:41 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:45 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:50 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:51 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (1281ms)
Aug 12 19:14:52 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:14:55 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (3187ms)
Aug 12 19:14:57 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:15:01 192.168.1.10 ECM to newcamd 83.166.48.44:4000
Aug 12 19:15:01 192.168.1.10 [mg0] newcamd route 83.166.48.44:4000 cant decode (102ms)

[aksa2030]

ресивер ги 8895, подписка плюс 36 хд
заранее спасибо

[capuchino]

народ,помогите..

парюсь уже какой день

не показывает и все....

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 00 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 530
#N: { 02 }

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
#L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
#L: { 02 } 192.168.178.26 514
L: { 01 }192.168.178.26 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
#H: { 07 }
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 01 }

# map all 180x nagra caids to 1801
# default is 01
F: { 01 }

CWS = rlst15.dwbl.tv 4008 xxxxxx xxxx01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
#CWS = rlst15.dwbl.tv 4500 xxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS = rlst15.dwbl.tv 4032 xxxxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS_CONNECT_TIMEOUT = 120
CWS_KEEPALIVE = yes

log
Aug 17 19:30:30 192.168.178.46 [mg0] stoping camd..
Aug 17 19:30:30 192.168.178.46 [mgcamd] emm stopped
Aug 17 19:30:32 192.168.178.46 [mgcamd] signal 15 received
Aug 17 19:31:32 192.168.178.46 [mg] Net:0:1:2:5s Show ecm:0, emm:0 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:0 Log:1:192.168.178.26:514 Reread:4
Aug 17 19:31:32 192.168.178.46 [mg] Ecm cache time: 15
Aug 17 19:31:32 192.168.178.46 Box type: dbox2
Aug 17 19:31:32 192.168.178.46 Keys readed
Aug 17 19:31:33 192.168.178.46 [mgcam] emm thread started
Aug 17 19:32:00 192.168.178.46 got 58 cmd 9F
Aug 17 19:32:00 192.168.178.46
Aug 17 19:32:00 192.168.178.46 [mg0] service B index 0 pmt pid 0 (1), pids: video 0x06FF, audio 0x0700 0x0703
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1744 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1844 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1B44 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1F44 ProvID: 000000
Aug 17 19:32:00 192.168.178.46 CaPID: 0x1A44 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 [mgcamd] emm started
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1000 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1502 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1002 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1009 ProvID: 000000
Aug 17 19:32:01 192.168.178.46 CaPID: 0x1008 ProvID: 000000
Aug 17 19:33:19 192.168.178.46
Aug 17 19:33:19 192.168.178.46
Aug 17 19:33:24 192.168.178.46
Aug 17 19:33:24 192.168.178.46
Aug 17 19:38:01 192.168.178.46
Aug 17 19:38:01 192.168.178.46
Aug 17 19:38:20 192.168.178.46
Aug 17 19:38:20 192.168.178.46

[telez]

#CWS не првильно,убрать #
ресивер какой?
B: { 06 }
F: { 00 }

[capuchino]

dbox2 GLJ

[telez]

Рес,не знаком может так
B: { 00 }
F: { 00 }
CWS = rlst15.dwbl.tv 4008 xxxxxx xxxx01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv
CWS = rlst15.dwbl.tv 4500 xxxxxxxx xxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

[capuchino]

не идет ни чего....


log

Aug 17 21:38:14 192.168.178.46 [mg0] service 2EE3 index 0 pmt pid 0 (9), pids: video 0x00A3, audio 0x0068 0x006A
Aug 17 21:38:14 192.168.178.46 [mg0] No supported encryption system found
Aug 17 21:38:14 192.168.178.46 [mg0] stopped
Aug 17 21:39:27 192.168.178.46 [mg0] stoping camd..
Aug 17 21:39:27 192.168.178.46 got 63 cmd 9F
Aug 17 21:39:27 192.168.178.46
Aug 17 21:39:27 192.168.178.46
Aug 17 21:39:27 192.168.178.46 [mg0] service B index 0 pmt pid 0 (10), pids: video 0x06FF, audio 0x0700 0x0701 0x0703
Aug 17 21:39:27 192.168.178.46 CaPID: 0x1744 ProvID: 000000
Aug 17 21:39:27 192.168.178.46 CaPID: 0x1844 ProvID: 000000
Aug 17 21:39:27 192.168.178.46 CaPID: 0x1B44 ProvID: 000000
Aug 17 21:39:27 192.168.178.46 CaPID: 0x1F44 ProvID: 000000
Aug 17 21:39:27 192.168.178.46 CaPID: 0x1A44 ProvID: 000000
Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode
Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1744 failed to decode.
Aug 17 21:39:27 192.168.178.46 [mg0] No nagra2 key(s) found for id 33F6 keynr 00
Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode
Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1844 failed to decode.
Aug 17 21:39:27 192.168.178.46 [mg0] network can't decode
Aug 17 21:39:27 192.168.178.46 [mg0] pid 0x1B44 failed to decode.
Aug 17 21:39:28 192.168.178.46 [mg0] network can't decode
Aug 17 21:39:28 192.168.178.46 [mg0] pid 0x1F44 failed to decode.
Aug 17 21:39:28 192.168.178.46 [mg0] network can't decode
Aug 17 21:39:28 192.168.178.46 [mg0] pid 0x1A44 failed to decode.
Aug 17 21:40:08 192.168.178.46 Mgcamd v1.38a @ mixvt, patched by D2MAC on Jul 18 2012
Aug 17 21:40:08 192.168.178.46 [mg] Net:1:1:0:3s Show ecm:1, emm:0 Up:1 Au:0 Dir:0 Osd:neutrino:80:3 Cache:0 Log:1:192.168.178.26:514 Reread:0
Aug 17 21:40:08 192.168.178.46 [mg] Ecm cache time: 7
Aug 17 21:40:08 192.168.178.46 Box type: dbox2
Aug 17 21:40:08 192.168.178.46
Aug 17 21:40:08 192.168.178.46 Keys readed
Aug 17 21:40:09 192.168.178.46 [config] newcamd route = capuchino:rlst15.dwbl.tv:4500 server cardserv
Aug 17 21:40:09 192.168.178.46 newcamd keep alive: 600, incoming port: 0
Aug 17 21:40:09 192.168.178.46 [mgcam] emm thread started
Aug 17 21:40:09 192.168.178.46 [newcamd] Connecting to rlst15.dwbl.tv:4500...
Aug 17 21:40:34 192.168.178.46 Mgcamd v1.38a @ mixvt, patched by D2MAC on Jul 18 2012
Aug 17 21:40:34 192.168.178.46 [mg] Net:1:1:0:3s Show ecm:1, emm:0 Up:1 Au:0 Dir:0 Osd:neutrino:80:3 Cache:0 Log:1:192.168.178.26:514 Reread:0
Aug 17 21:40:34 192.168.178.46 [mg] Ecm cache time: 7
Aug 17 21:40:34 192.168.178.46 Box type: dbox2
Aug 17 21:40:34 192.168.178.46 Keys readed
Aug 17 21:40:35 192.168.178.46 [config] newcamd route = capuchino:rlst15.dwbl.tv:4500 server cardserv
Aug 17 21:40:35 192.168.178.46 newcamd keep alive: 600, incoming port: 0
Aug 17 21:40:35 192.168.178.46 [mgcam] emm thread started
Aug 17 21:40:35 192.168.178.46 [newcamd] Connecting to rlst15.dwbl.tv:4500...
Aug 17 21:40:35 192.168.178.46 [newcamd] Login to rlst15.dwbl.tv:4500 as capuchino accepted (85ms)
Aug 17 21:40:36 192.168.178.46 [newcamd] Card data from rlst15.dwbl.tv:4500 (204ms):
Aug 17 21:40:36 192.168.178.46 Userid 2 caid 0 providers 0
Aug 17 21:40:36 192.168.178.46
Aug 17 21:40:39 192.168.178.46 got 63 cmd 9F
Aug 17 21:40:39 192.168.178.46
Aug 17 21:40:39 192.168.178.46
Aug 17 21:40:39 192.168.178.46 [mg0] service B index 0 pmt pid 0 (1), pids: video 0x06FF, audio 0x0700 0x0701 0x0703
Aug 17 21:40:39 192.168.178.46 CaPID: 0x1744 ProvID: 000000
Aug 17 21:40:39 192.168.178.46 CaPID: 0x1844 ProvID: 000000
Aug 17 21:40:39 192.168.178.46 CaPID: 0x1B44 ProvID: 000000
Aug 17 21:40:39 192.168.178.46 CaPID: 0x1F44 ProvID: 000000
Aug 17 21:40:39 192.168.178.46 CaPID: 0x1A44 ProvID: 000000
Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode
Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1744 failed to decode.
Aug 17 21:40:39 192.168.178.46 [mg0] No nagra2 key(s) found for id 244E keynr 01
Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode
Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1844 failed to decode.
Aug 17 21:40:39 192.168.178.46 [mg0] network can't decode
Aug 17 21:40:39 192.168.178.46 [mg0] pid 0x1B44 failed to decode.
Aug 17 21:40:40 192.168.178.46 [mg0] network can't decode
Aug 17 21:40:40 192.168.178.46 [mg0] pid 0x1F44 failed to decode.
Aug 17 21:40:40 192.168.178.46 [mg0] network can't decode
Aug 17 21:40:40 192.168.178.46 [mg0] pid 0x1A44 failed to decode.

[fed]

И не пойдет если ресивер видит что канал кодирован незнакомой ему кодировкой или вообще открыт