QboxHD Настройки

[159as4678]

Купил QboxHD от Duolabs, пока всё впечатляет но никак ЕМУ немогу настроить, буду очень благадарен за помощь, я сижу уже 5 дней и никак немогу понять как оно в нём действует, здесь стоит "QboxHD Softcam Panel V2.0.0" с встроеными Softcam´s kak: "Incubus Camd" , "mbox 0.5 B21" , "mbox-newcs" , "Mgcamd 1.35","OsCam2139" и "RaDaR 4,11"
где что находится:
var/etc : radar.cfg выглядет так :

RaDar Cfg Version: 4.11]

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# -=- This new RaDaR 2.6 supports card server & emu inside =-=-
# -=- Now your QBoxHD can work as card server =-=-
# -=- to share your local Smartcards. =-=-
# -=- No more need for CCCam to make it work!! =-=-
# -=- =-=-
# -=- Supported Smartcards: =-=-
# -=- =-=-
# -=- * Viaccess =-=-
# -=- * Seca (with EMM) =-=-
# -=- * Irdeto (with EMM) =-=-
# -=- * Viaccess (with EMM) =-=-
# -=- * Nagra (mediaset and TvSat) no sharing (with EMM) =-=-
# -=- * NDz =-=-
# -=- * Cryptoworks =-=-
# -=- * Conax (with EMM) =-=-
# -=- * Minors =-=-
# -=- * HD+ =-=-
# -=- =-=-
# -=- Radar Client is compatibile with: =-=-
# -=- * CCCam Servers (tested only with server 2.0.11) =-=-
# -=- * GBox Servers =-=-
# -=- * NewCamD Servers =-=-
# -=- =-=-
# -=- Radar Server is compatibile with: =-=-
# -=- * Radar Clients only ATM =-=-
# -=- =-=-
# -=- Radar is extremely flexible and will search =-=-
# -=- on all possible servers to resolve the =-=-
# -=- control word on time. =-=-
# -=- =-=-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

#---------------------------------------------------------------------#
#------------------- GENERAL CONFIGURATIONS --------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-
# -= CARD LOG =-
# -=-=-=-=-=-=-=-
#Set this flag to "1" to enable add/remove !! CCCAM !! card log
cardlog: 0

# -=-=-=-=-=-=-=-=-
# -= QBOXHD LED =-
# -=-=-=-=-=-=-=-=-

# Use front panel leds for visible check out of send ecm/get cw ,
# please choose only one option: PANEL or BOARD
# you can also select which color give to your leds !( in HSV format)
# correct range value for HSV are: Hue(0-360) Saturation(0-100) Value(0-100)
# example: 'L: led_check_system PANEL 0 100 100' we want RED on front panel.

#L: led_check_system PANEL H S V
#L: led_check_system BOARD H S V

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# -= QBOXHD CARD SLOT CONFIGURATION =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

# Set this flag to enable internal Radar smartcard management.
# set "ON" or "OFF" for each smart slot of decoder (Upper or lower).
# ATTENTION !!
# Radar can work using NewCS as card reading system or its internal card reading system.
# Radar and NewCS cannot work both at the same time.
# Some combination can be applied.
# Here is an Example 1:
# [SmartCard Manager]
# UpperSlot=ON Radar Card reading system
# LowerSlot=OFF NewCS Card reading system (in this case you must add the NewCS line, see example 2)

[SmartCard Manager]
UpperSlot=ON
LowerSlot=ON

# Expample 2. Assign NewCS card reading line. (Remember to remove the first # to get it to work!)
#
# #Upper Slot (Port 30001) - (radar radar = username password) - (01 02 ... is the 3Des Key)
# N: 127.0.0.1 30001 radar radar 01 02 03 04 05 06 07 08 09 10 11 12 13 14
# #Lower Slot (Port 30000) - (radar radar = username password) - (01 02 ... is the 3Des Key)
# N: 127.0.0.1 30000 radar radar 01 02 03 04 05 06 07 08 09 10 11 12 13 14

# ************************************************** *********
# ***** E M U C O N F I G U R A T I O N *********
# ************************************************** *********

[Internal Emu]

EnableInternalEMU=ON
#EnableInternalEMU=OFF



# ************************************************** *********
# ***** C L I E N T C O N F I G U R A T I O N *********
# ************************************************** *********


#---------------------------------------------------------------------#
#------------------- CCCAM OR GBOX CLIENT LINES ----------------------#
#---------------------------------------------------------------------#

# Insert here CCCam line (if you are a CCCam Client). Multiple line accepted.
# Insert here GBox line (if you are a GBox Client).
# You can insert ONLY one GBox line.


#---------------------------------------------------------------------#
#--------------------- RADAR CLIENT LINES ---------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-=-=-=-=-=-=-
# -= CLIENT CONFIGURATION =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-
# This option enables you to connect to a Radar Server.
R: Line ----> Radar Server 1
R: Line ----> Radar Server 2
# Multiple line are accepted.
# Any port can be used as long as server and client are using the same port (important).
#
# Example 3 Radar Client Line:
#
# | IP ADDRESS | or | SERVER NAME | PORT | USER || PASSWORD |
#R: Server.dyndns.tv 4015 USER PASSWORT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv


# ************************************************** *********
# ***** S E R V E R C O N F I G U R A T I O N *********
# ************************************************** *********

#---------------------------------------------------------------------#
#----------------------RADAR CONFIG SERVER ---------------------------#
#---------------------------------------------------------------------#

# -=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-
# -= SERVER ON or SERVER OFF =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-

[Set Server mode ON or OFF]
#ServerMode=ON
#ServerMode=OFF

# -=-=-=-=-=-=-=-=-=-
# -= SERVER's PORT =-
# -=-=-=-=-=-=-=-=-=-
# Please set here the server port number (xxx). Server port must be the same as client port.

[Set Server Port Number]
PortNumber=xxx

# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# -= SERVER's USER LIST AND PRIVILEGES =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# This is the allowed to connect user list.
# Here you can set the users name and passwords that can connect to your server.
# You can decide how many accounts can be logged in simultanously. Extra connections will be denied.
# All parameters MUST be set.
# Sharing level is the number of re-sharing that can be done related to a control word.
#
# Example 4:
# |USER||PASSWORD||SHARING LEVEL||ACCOUNTS|
# F: user1 password1 2 3

[Allowed Users]



# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-
# -= EXCLUDE ECM LIST =-
# -=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-

# Here you can set a list of pairs < caid -- sid > which won't be processed by server.
# If the received ecm match one of theese rules it will be discard !

# Example 5:
# EXCLUDE 919 2dca
# incoming ecm with caid <0x919> and sid <0x2dca> will be discard !


# EXCLUDE caid sid