Срочно нужна помощь. HD ресивер GI S8120

[hjvf71]

Помогите второй день настраивай gi8120 не могу понять что не так(((. Вот нмои настройки где ошибка: CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = rlst4.dwbl.tv 4000 xxxxx xxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan
CWS = rlst4.dwbl.tv 4022 xxxxx xxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan

mg_cfg
#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x1ACB

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 5 30

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 150 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 00 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 192.168.0.103 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

[ches01]

лог где?

[telez]

15 мин ждали?

[hjvf71]

не могу снять лог, пробовал 3CSyslog и через Tray Syslog прописал везде все и ни чего

[hjvf71]

после чего

[ches01]

тогда мгстат-инфо покажите из тмп

[telez]

Сообщение от hjvf71

после чего

После того как купили,пробывать смотреть нужно через 15 мин.если пробуете сразу, сервер не принимает Ваш ресивер,в следствие чего тёмный экран,конечно в логе было бы это видно

[hjvf71]

я свой пакет купил месяц назад

[hjvf71]

Сообщение от ches01

тогда мгстат-инфо покажите из тмп

а по подробней можно я со сленгом не дружу))

[ches01]

по фтп зайти в рес
увидите папку тмп
в нем мгстат-инфо

[hjvf71]

вот
tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45), Sat Sep 21 06:35:30 2013
mg uptime 5012d 06h 34m 37s, service changes: 1, ecm processed: 0, lost cw warnings: 0

Newcamd:
Host/port Recon. Emm out Ecm out Cw in Avg. ecm time
rlst4.dwbl.tv : 4000 1 0 2326 0 0
rlst4.dwbl.tv : 4022 1 0 0 0 0

Box: uptime = 8967s, CPU load: 1 min 1269376 / 5 min 1277216 / 15 min 1274592
RAM in bytes: total 119488512 / free 40914944 / shared 0 / buffers = 208896
mgcamd: total memory allocated by malloc, in bytes: 135168 (132kb), chunks 38032

[ches01]

пропишите ип из группу любой
рестарт мгкдам
а покажите мгстат

[hjvf71]

tuxbox mgcamd v1.35 by mixvt (compiled Jan 20 2010 22:15:45), Sat Sep 21 07:02:14 2013
mg uptime 5012d 07h 01m 21s, service changes: 3, ecm processed: 0, lost cw warnings: 0

Newcamd:
Host/port Recon. Emm out Ecm out Cw in Avg. ecm time
91.203.146.90 : 4000 1 0 15 0 0
91.203.146.90 : 4022 1 0 0 0 0

Box: uptime = 122s, CPU load: 1 min 956384 / 5 min 323232 / 15 min 114784
RAM in bytes: total 119488512 / free 40710144 / shared 0 / buffers = 208896
mgcamd: total memory allocated by malloc, in bytes: 135168 (132kb), chunks 35136

[kolxoz]

Сообщение от hjvf71

Помогите второй день настраивай gi8120 не могу понять что не так(((. Вот нмои настройки где ошибка: CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = rlst4.dwbl.tv 4000 xxxxx xxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan
CWS = rlst4.dwbl.tv 4022 xxxxx xxxxxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan

mg_cfg
#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x1ACB

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 01 } 5 30

# network ecm timeout in seconds
K: { 07 }

# newcamd dead routes connect retry, sec
Q: { 150 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 00 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 192.168.0.103 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 00 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }

Вот мой mg_cfg попробуй

#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 1 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 02 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 01 } 192.162.1.1 514

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 07 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 11 ipbox
# 12 eucalyptus eating creature
B: { 06 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { http://some.host.com/keys.php }

а вот невкамд

CWS = сервак порт логин пароль 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = сервак порт логин пароль 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = сервак порт логин пароль 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = сервак порт логин пароль 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv

CWS = сервак порт логин пароль 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserv


CWS_CONNECT_TIMEOUT = 120

CWS_KEEPALIVE = yes

[ches01]

а еще 2 ИП проверьте
https://forum.rlst.tv/showthread.php?t=6631 файлы как тут или опять нашли где то

[kolxoz]

Сообщение от ches01

а еще 2 ИП проверьте
https://forum.rlst.tv/showthread.php?t=6631 файлы как тут или опять нашли где то

какие нафиг 2 ип ? работает у меня всё супер

[VladimirStupino]

У меня полный пакет, но почему то перестали идти все пакеты, проверьте пожалуйста

[hjvf71]

[quote=ches01]а еще 2 ИП проверьте
https://forum.rlst.tv/showthread.php?t=6631 файлы как тут или опять нашли где то[/QUO
да все только отсбда

[hjvf71]

Сообщение от ches01

а еще 2 ИП проверьте
https://forum.rlst.tv/showthread.php?t=6631 файлы как тут или опять нашли где то

остальные два не пингуются

[ches01]

смените группу